The MAX Pro Engraver, Vision’s most versatile engraving machine.
Engravers Journal Reviews the MAX Pro:
The MAX Pro Engraver was developed to be Vision’s most versatile engraving machine to date, allowing for engraving of flat, deep, round or odd-shaped items in one compact, easy-to-use machine. The system contains Vision’s automatic surface-sensing feature that allows for flat and curved surface engraving on a wide range of materials such as plastic, brass, coated and non-coated metals, artificial stone, pewter, glass, and more. For easy job setups, the MAX Pro uses Vision’s Auto Laser Layout feature, which sends the engraving area and position directly to the software without measuring. Each MAX Pro system includes the Vision Series 3 high-speed electronics with handheld pendant.The MAX Pro system includes a large flat engraving table and an interchangeable, self-centering vise with tilt for engraving deep, long or odd-shaped items. The unit also has a built-in cylindrical feature for engraving round items and a self-contained, recirculating water pump for glass engraving. Applications for this machine run the gamut from plaques, badges, and trophy plates to gift ware, glassware, and even industrial parts marking. Optional items include work-holding fixtures for specific items such as medallions, notary seals, pens, etc. All of our engraving machines are made in the USA, built to be rugged, reliable and backed with a superior customer support team.
Max Pro Highlights: • 8”x12” aluminum T-slot table• 16,000-RPM spindle (collet optional) w/ 3” of travel• Engraving speeds up to 10” per second• Motorized cylindrical engraver & work-holding vise• Integrated cooling system for glass engraving & artificial stone• Integrated Series 3 controller • Fully-featured hand held pendant w/ LCD• Runs directly from Vision, Vision PRO-LT, Vision PRO, CorelDRAW™, Flexi-Sign™, SignLAB™, EngraveLAB™, Enroute™, Type 3™ and many other software packages• Red laser pointer for easy set-ups• Limited 2 year warranty
Max Pro Specifications Chart
MAX. Engraving Area
8″ x 12″
MAX. Work Piece Clearance
Flat 14″(L) x Any Width x 7″(H) – Cyl. 12″ x 6″ Dia.
Z-Axis Stroke
3″
Spindle Clearance w/ optional risers
Cylindrical / Flat = 3″ w/ Vise = 7″
Spindle Size/Type optional
11/64″, 6mm or 1/4″ / Top Loading Top/Bottom collet
Spindle Motor Power / RPM
1/7HP / 16.000 RPM (max)
Resolution / Speed
0.0002″ – 10″/sec
Table Type
Aluminum T-slot, Cylindrical (Ring attachment-optional)
Interface
Serial – Ethernet
Controller
Built-In w/ Series 3 Pendant
Warranty
2 Years Limited
Power Requirements
110/220V 10 Amp
Physical Dimensionscontroller dimensions
28″(W) x 28″(D) x 26″(H)
Shipping Dimensions
37″(W) x 35″(D) x 39″(H) 353lbs
Visit Us At www.visionengravers.com