MultiMat will not be able to hold material down sufficiently once it becomes saturated with debris. To clean your MultiMat we recommend using glass cleaner or dish soap and water along with paper towels.
Install and clean your MultiMat video – Click to watch now.
1. First, you’ll want to apply your cleaning solution to the MultiMat. If there is a lot of debris you will need to apply more solution.
2. Wipe the chips in one direction.
The goal is to pull the chips off of the mat completely so avoid short, back and forth strokes.
3. Be sure to keep both sides of the MultiMat clean, as buildup on the bottom surface may allow the mat to slide across the table.Social tagging: cleaning > engraving tip > holding device > multi mat > multimat > Vision Engraving & Routing Systems